| Store
Hours: Monday~Friday. 8:00am~6:00pm Pacific Time |
Ampeg.com | |
| 1-951-369-7888 | ||
|
|
|
|
|
|
|
|||||
|
|
||||||||||
|
|
|
|
|
|
||||||
|
|
||||||||||
 |
|||||||||
| Ampeg Bass Amps in stock at Wild West Guitars. Ampeg Bass Amps in stock at Wild West Guitars. We carry the SVT-CL Classic and SVT-410HE along with the Diamond Blue Bass B15R Combo. SVTAV, SVT-CL Classic, SVT Classic, Ampeg 410 Cab, SVT-410HE, B15R |
|
||||||||
|
|||||||||
 Dan Armstrong |
Dan Armstrong ADAG Break out those bell-bottoms and warm-up the VW microbus, the Ampeg Dan Armstrong “See-Through” guitars are back! Reminiscent of the late '60s, these instruments occupy a special place in rock ‘n roll history In 1969 Ampeg and guitar super-guru Dan Armstrong set about revolutionizing the electric guitar. What came next was "clearly" innovative, technologically advanced and well, clear! The Rolling Stones took the stage with Keith Richards sporting the 'See Through' guitar and Bill Wyman playing the companion bass. The legend was born.
|
||||||||
| SVT-CL Classic | |||||||||
-+ Quantity 2 |
SVT-CL
Classic Head Other companies keep trying to recreate the classic all-tube sound of the 60's and 70's Ampeg heads, but it's just not the same as the real deal - Ampeg. And we're the ONLY bass amp company that can make that claim. When you specify a Classic Series head from us, it's not like an Ampeg...it is an Ampeg. The Classic Series Heads are designed for players who are looking for the authentic, vintage Ampeg tube sound that has earned the respect of the industry. For the ultimate experience, it's the SVT-CL - the Classic, as it's known in the business. There is no equivalent to its 300 watt output courtesy of six 6550 power tubes. Specifications: Dimensions: 24 x 11.5 x 13 Weight: 80 Pounds Balanced Line Out: Yes (transformer) Driver Tubes: 2 x 12AU7, 1x 12AX7 phase splitter (could also be used as a driver tube) Effects Loop: No Graphic EQ: n/a Mid Tone Control: 5 pos Power Amp (Tube or MOSFET): T (6 x 6550) Preamp (Tube or Solid State): T (2 x 12AX7) RMS Power Output (2 ohms): 300 Watts RMS Power Output (4 ohms): 300 Watts RMS Power Output (8 ohms): n/a Tone Controls: 3 band Ultra Low/High Boosts: Yes |
||||||||
|
|||||||||
| SVT-VR Vintage Reissue | |||||||||
Quantity 1 |
A
vintage reissue of the highly sought after 1970's blue-line SVT head.
With the new SVT-VR, the Ampeg engineering and product
development teams had one primary goal-get as close to the coveted tone
of the classic SVT as possible. As a result, the preamp stage, power section,
and even the rocker switches of the new SVT-VR emulate the exact signal
path, tone, and vibe of the original. |
||||||||
Ampeg SVT-VR Vintage Reissue 300 Watt SVT Amp Head Features:
|
|||||||||
| SVTAV Anniversary Head | |||||||||
Quantity 0 |
SVT-AV The all-tube SVT-AV is a direct descendent of the original SVT head, but with modern enhancements like a five-position mid frequency selector, input gain, master volume, and tube protection circuitry. By using six 6550 power tubes and original tranformer technology, Ampeg creates the classic tone of the Sixties and Seventies that others can only try to emulate. Specs: Dimensions: 24 x 11.5 x 13 Weight: 80 Pounds Preamp (Tube or Solid State): T (2 x 12AX7) Driver Tubes: 2 x 12AU7, 1 x 12AX7 phase splitter (could also be used as a driver tube) Power Amp (Tube or MOSFET): T (6 x 6550) RMS Power Output (2 Ohms): 300 Watts RMS Power Output (4 Ohms): 300 Watts RMS Power Output (8 Ohms): n/a Tone Controls: 3 band Mid Tone Control: 5 pos Graphic EQ: n/a Ultra Low/High Boosts: Yes Balanced Line Out: Yes (transformer) Effects Loop: No Preamp Out/Power Amp In: Yes |
||||||||
| Other
Features Normal and Padded Input Tube Protection Circuitry Auto-fault Mode Fan Cooled Slave Output Jack 2 Ohm Impedance Selection User Biasing Controls 3 Position A/C Polarity Switch |
|||||||||
| SVT-810AV Cabinet | |||||||||
 Large View SVT-810AV MSRP $1,499.00 Our price $1,049.00 Quantity 1 |
SVT-810AV When the Rolling Stones toured in the late sixties and early seventies, the world was exposed to a new technology - the Super Valve Technology or the SVT. Since then, bass players recognize the unmistakable Ampeg sound - 300 watts of pure tube power exciting eight 10" drivers. The sonic result is a foundation of solid lows, cutting mids, and satisfying highs. Today's updated reissue Anniversary models offer the same soul-shaking vintage tone in traditional and contemporary options. The all-tube SVT-AV is the direct descendant of the original, but with new twists like an input gain and master volume, a five-position mid frequency selector to fine-tune your critical midrange, and incredible tube protection circuitry. The matching SVT-810AV and SVT-410AV enclosures employ the same driver technology that make Ampeg enclosures the number one name in speakers. |
||||||||
| SVT-810E Cabinet | |||||||||
Quantity 2 |
SVT-810E The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. Specs: Dimensions: 48 x 26 x 16 Weight: 165 Pounds Component 1: Magnet Weight: 30oz Component 1: Size: 8 x 10" Component 1: Voice Coil: 2" Component 2: Magnet Weight: n/a Component 2: Size: n/a Component 2: Voice Coil: n/a Crossover Frequency: n/a Frequency Response (-3 dB): 58 Hz - 5 KHz Maximum SPL: 130 dB Nominal Impedance: 4 Ohms Program Handling: 1600 Watts RMS Handling: 800 Watts Sensitivity: 100 dB Usable Low Frequency (-10dB): 40 Hz |
||||||||
| SVT-410HE Cabinet | |||||||||
Quantity 2 |
SVT-410HE The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. Specifications: Dimensions: 25 x 24 x 16 Weight: 91 Pounds Component 1: Magnet Weight: 30 oz Component 1: Size: 4 x 10" Component 1: Voice Coil: 2" Component 2: Magnet Weight: 8 oz Component 2: Size: Horn/Driver Component 2: Voice Coil: 1" Crossover Frequency: 4 kHz Frequency Response (-3 dB): 60 Hz - 18 kHz Maximum SPL: 122 dB Nominal Impedance: 8 Ohms Program Handling: 1000 Watts RMS Handling: 500 Watts Sensitivity: 98 dB Usable Low Frequency (-10dB): 43 Hz |
||||||||
| B15R Diamond Blue Combo | |||||||||
Quantity 0 |
B-15R
Combo The Portaflex "flip-top" was at the head of the Sixties bass revolution. Used on thousands of classic recordings, the B-15R is still a staple in recording studios today. Modern enhancements include 100 watts of watts of all-tube output, a super-efficient 15" driver, an adjustable tweeter, and a 5-position mid-frequency select. Specifications: Dimensions: 24 x 33 x 16.5 Weight: 117 Pounds Balanced Line Out: Unbalanced Effects Loop: n/a Graphic EQ: n/a High Frequency Component: n/a Mid Tone Control: Ultra Mid Power Output w/ext. Cabinet: n/a Preamp Out/Power Amp In: n/a RMS Power Output: 100 Watts Speakers: 15" Tone Controls: 4 Band Other Features 4 x Groove Tubes 6L6 |
||||||||
| BA115HPT Bass Amp | |||||||||
Quantity 1 |
When you need a portable rig with legendary Ampeg tone, look no further than the BA115. This powerful combo features a 100-Watt power section and a single 15" Ampeg speaker that can rock a small- to medium-sized venue. Just plug in and you're ready to rock! No matter what sound you're after, the Style Control puts absolute tone at your fingertips. With five presets to choose from, and the tone-sculpting capabilities of an onboard 3-band EQ, you'll be dialed in before the drummer can finish setting up his high-hat. The BA115's monitor-style, tilt-back design allows you to put the sound where you want it, which is especially handy when you're using the built-in DI for recording or front of house applications. Rock-solid construction and Ampeg thump to go, the BA115. |
||||||||
RMS Power Output: 100-Watts |
|||||||||
| B115E Bass Cab | |||||||||
 Large View B115E
Bass Cab Quantity 1 |
The B115E bass speaker cabinet delivers classic Ampeg tone through a single 15" Ampeg driver. Front tuned ports ensure solid low-end response. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling. Ampeg B115E 1X15 Speaker Cabinet Specifications:
|
||||||||
Ampeg B115E 1X15 Speaker Cabinet Features:
|
|||||||||
| B100R Combo | |||||||||
 Large View B100R
Bass Combo Quantity 1 |
Classic sound, vintage looks, and an affordable price! The Ampeg B-100R Bass Combo Amp has the same warm tone and simple controls that made the Portaflex Ampegs of the 60s so popular, but it's solid-state for lighter weight and optimum reliability. 100W of power push a single vintage 15" driver. Blue Diamond covering gives it the classic Ampeg look of the 60s. |
||||||||
Ampeg B-100R Bass Combo Amp Features:
|
|||||||||
| Home Electric Acoustic Basses Amps Effects Accessories Artists Forum Contact Links | |||||||||
